T2 Alpha Design Alpha Femur Retrograde Nail The T2 Alpha Femur Retrograde Nailing System is intended for temporary stabilization of bone segments or fragments until bone consolidation has been achieved. Updated Locking Configuration Added proximal and distal locking options, three planes of fixation, and the most distal screw 6mm from the driving end of the nail allows for adequate stability and fixation. Advanced Locking Screws Provide increased axial fracture stability in any 5mm round locking hole when the surgeon chooses. IMN Locking Screws IMN locking screw design provides increased fatigue strength compared to competition. Femur Condyle Screws Adjustable condyle screws allow for a range of 2mm longer or 5mm shorter than the actual condyle screw length for compression of femur condyle fragments. Static Targeting Arm Designed to provide stability and procedural ease during distal screw insertion. Technical specifications Nail diameter Ø9mm–Ø14mm Driving end diameter of the 9–11mm nails is Ø11.5mm; nail sizes 12–14mm have a constant diameter Femoral Nail Retrograde, Short: 170mm and 200mm Femoral Nail Retrograde: 220mm– 480mm in 20mm increments Drills 4.2mm – green 5.5mm – green (counterbore drill) Screws Femur Retrograde Nail Femur Retrograde Nail Locking Screws Ø5mm, 25mm–120mm length 25mm–60mm in 2.5mm increments 60mm–120mm in 5mm increments Advanced Locking Screws Ø5mm, 30mm–100mm length 30mm–60mm in 2.5mm increments 60mm–100mm in 5mm increments Condyle Screws & Condyle Nut Ø5mm, 40mm –120mm length in 5mm increments