Pangea Design Variable Angle Locking Technology Pangea’s variable angle locking technology uses a CoCr locking screw, which is harder than the Ti6Al4V ELI plate, allowing for the screwhead’s threads to form a definitive locking position in the plate’s locking hole by engaging the softer, Ti6Al4V ELI material. This technology allows the user to aim and lock the screw into the plate within a true 30° cone of the predetermined hole trajectory. The variable angle drill guide provided with the system offers guidance with respect to the limit of the 30° cone. The locking mechanism remains functional for up to three attempts at locking screw insertion. Hybrid LC Holes (locking/compression) Hybrid LC Holes allow for either active compression with the use of a non-locking screw in the compression section of the hole or variable angle locking with the use of a locking screw in the universal section of the hole. If locking is not desired, the universal section of the hole also accepts non-locking screws. Each Hybrid LC Hole is designed to provide up to 2mm of compression. Note: Hybrid LC Holes are not available with every plate type. Refer to the “Plate details” page for additional information. Posterolateral Extension Asymmetric plate shape designed to support posterior buttressing by extending the plate more laterally Posteromedial Extension Hole Allows buttress effect while facilitating lateral capture of the medial fragment Proximal Rafting Screws Designed with variable angle locking technology which allows improved placement in conjunction with lateral based implant Oblong Hole To aid in plate placement Variable-Angle Screw Holes Circular universal holes accept nonlocking screws, and locking screws within a 30° cone 2.0mm K-Wire Hole Placement This plate is designed to be used for a medial coronal shear fracture of a Schatzker VI Plate position as well as screw options facilitate the use with Pangea proximal lateral tibia plates. This plate sits on the posterior medial side and wraps around posteriorly Fit Proximal Posteromedial Tibia Plate is designed to address both partial articular medial plateau fractures as well as support medial fracture fragments associated with bicondylar fractures The posterorlateral extension is designed to support more lateral posterior buttressing Designed with the use of SOMA: Stryker Orthopedics Modeling and Analytics The Pangea Proximal Posteromedial Tibia Plates provide better anatomic fit compared to competitive Synthes LCP Medial Proximal Tibia Plates Technical specifications Standard plate lengths: 4-12 hole (68-180mm) Thickness: 3.0mm Left and right anatomic plate options Drill bits: Ø2.5mm x 135mm (542020) Ø2.5mm x 215mm (542021) Screws Pangea Proximal Posteromedial Tibia Plate Pangea Proximal Posteromedial Tibia Plate Multiaxial locking 3.5 (10-120mm) Cortex 3.5 (10-120mm) Cancellous 4.0 (10-100mm) 4.0 (10-100mm)