T2 Alpha Design Tibia Nailing System The T2 Alpha Tibia Nailing System is intended for temporary stabilization of bone segments or fragments until bone consolidation has been achieved. Advanced Nail Design Increased proximal locking options More distal locking pattern with most distal hole remaining 5mm from the tip Up to 7mm of active internal compression Proximal 10 degree Herzog bend 4 degree distal bend Suprapatellar Instrumentation T2 Alpha Tibia Suprapatellar system offers two size options of drill sleeves available to accommodate nail diameters 8-13mm Elastic nail insertion sleeve designed to serve as a working channel to protect the joint space WCH-coated fixation k-wires designed for secure fixation in tibial plateau to prevent anteriorization and back out of sleeves during reaming Streamlined Instrument Platform Basic instrument tray that is used across all T2 Alpha nailing indications and Gamma4 Ergonomic instrumentation that is designed to improve ease of use Dedicated distal targeting device designed to reduce inconsistences by providing a reproducible step-by-step procedure Stability Advanced locking screws designed for added axial stability Can be used in all 5mm circular holes Fatigue strength is 30% stronger than the traditional locking screw Designed to reduce play between the nail and screw Technical specifications Nail diameters Ø8mm – Ø15mm Nail length 240mm – 420mm in 15mm increments Compression Screw Tibia End Cap Lower Extremity and End Caps Tibia Screws T2 Alpha Tibia Nail T2 Alpha Tibia Nail Locking Screws Ø5mm, 25mm – 120mm length 25mm - 60mm in 2.5mm increments 60mm - 120mm in 5mm increments Advanced Locking Screws Ø5mm, 30mm – 100mm length 30mm - 60mm in 2.5mm increments 60mm - 100mm in 5mm increments Drills 42mm - green 55mm - green (counterbore drill) 35mm - orange 45mm - orange (counterbore drill)